Argolis Smartreader.exe

This tutorial assumes the user has a DM7020 or a DM800. The tutorial can be used as it is, or adapted easily for a standard Linux setup. How to set smartreader operating mode using Windows (It did not work for it in Vista for me, It worked in XP) 1: Install the windows drivers found here Smartreaderplus Drivers 2: Open smartreader.exe 3: Plug the smartreader into a usb port 4: Select. DOWNLOAD ARGOLIS SMARGO UPDATE 1.5 - Also oscam startet nur leider gibs ein problem wobei ich denke das es nur ein treiber problem ist erst mal der log. Results 1 to 18 of Japp das Problem. Argolis Reader.exe; Ich bin gerade dabei meinen Argolis Smartreader plus mit der richtigen Firmware auszustatten, aber so ganz blicke ich noch nicht durch. How To Setup The Smargo Smartreader+. So run the SmartreaderUpdate.exe. So run the Smartreader.exe and change the kernel settings to Dreambox and click Apply. ARGOLIS WIRELESS ONE.

Smargo Smartreader tutorial This tutorial assumes the user has a DM7020 or a DM800. Smartreader update, smartreader.exe, how to. How To Setup The Smargo Smartreader+. So run the SmartreaderUpdate.exe. So run the Smartreader.exe and change the kernel settings to Dreambox and click Apply. Acer TravelMate 6593 Notebook Bios 1.13. Argolis sollte sich dann aber ranhalten endlich ein Tool zu bringen. Der Tripple ist doch mindestens schon ein Jahr auf dem Markt., 22:08 Argolis Smargo Smartreader Triple # 17. Now we need to put the smargo in the correct mode to run directly in the Dreambox. So run the Smartreader.exe and change the kernel settings to Dreambox and click Apply. Ok, so now your done with the Smargo setup tools. Move to the dreambox now. Go to the blue panel, and select Extras / Settings, then select Kernel Modules. Screenshot is lastig hier omdat ik het eerst naar een website zou moeten uploaden. Als ik smartreader.exe draai onder windows dan krijg ik een schermpje met deze instellingen: Mode = autoswitch Kernel = Normal T-Mode = T=0 EGT = 0.

Here's a tutorial to setup the smargo.

Here's how to get it working.

Requirements ..

DM7025 / DM800 / DM8000 / DM7020
Smargo Smartreader+ -
Software Tools - Download _http://www.dreamboxtutorials.com/attachment.php?attachmentid=9&stc=1&d=1221768642
Latest Gemini GP2 Image or Nabilo Image.

Unpack the tools zip file to somewhere useful.
Plug the smargo into a USB port on your PC.
Windows will detect the new device.
Do a manual drivers install , pointing to the Drivers_Windows folder.
It will prompt for drivers for the USB device , then again for the serial device. OK, once the drivers are installed we're ready to go.

Ok, lets go.

Make sure the smargo is plugged into the PC with NO viewing card in it.

Srs audio fusion serial key. Firstly, we need to check the smargo firmware version, so run the SmartreaderUpdate.exe

If the firmware is v1.3 it will say so in the status bar at the bottom of the window and you can close this util, if not, click the update button and it will apply the update.

Now we need to put the smargo in the correct mode to run directly in the Dreambox. So run the Smartreader.exe and change the kernel settings to Dreambox and click Apply.

Ok, so now your done with the Smargo setup tools.

Move to the dreambox now.

GEMINI 2 IMAGE ..
Go to the blue panel, and select Extras / Settings , then select Kernel Modules.
Enabled the 'USB Cardreader FTDI' option. I think a reboot is required after enabling this.

Ok , lastly lets edit the CCcam.cfg to suit our new reader.
Simply add the following line

1. SERIAL READER : /dev/usb/tts/0 smartreader+

NABILO IMAGE ..

Install the appropriate driver from this zip file. It contains Nabilo packaged drivers for the DM7025 / 800 / 8000. Ftp the correct file to /tmp and then go to the Green Panel, then addons. Select manual install of nab.tgz files. You should now see the file you FTP'd in the list. Simply select it and confirm to install.

Thanks to sonic1, ( I missed this part out.)
Edit the file /etc/init.d/bootup

Argolis Smart Reader Exe Reader

you add:

echo 90 > /proc/progress
modprobe ftdi_sio

Restart enigma 2

Again, edit the CCcam.cfg to suit our new reader.

1. SERIAL READER : /dev/usb/tts/0 smartreader+

Enigma 1 DM7020

The smargo software package I've included does include a driver for the DM7020. This can be applied via telnet quite easily. Again, FTP the 2 drivers to /tmp and make sure you Chmod them to 755. Failure to do this will halt the install of these drivers. Then in a telnet session enter the following.

Argolis Smart Reader Exe Installer

1. ipkg install /tmp/kernel-module-ftdi-sio_2.6.9-r9_dm7020.ipk
2. ipkg install /tmp/kernel-module-usbserial_2.6.9-r9_dm7020.ipk

Obviously , same applies , add the CCcam.cfg line

1. SERIAL READER : /dev/usb/tts/0 smartreader+

Edit the file bootup in the folder /ect/init.d

you add:

1. echo 90 > /proc/progress
2. modprobe ftdi_sio

Restart enigma 2

Then if you wish to change the clock frequency you need to add this line:-
SMARTCARD CLOCK FREQUENCY: /dev/ttsUSB0 XXX0000

SMARTCARD CLOCK FREQUENCY: /dev/ttsUSB0 6800000 [ Tested and working on UK NDS2 CARDS ONLY ]

Argolis Smart Reader Exercises

Thats it guys, enjoy the smargo !

Argolis Smart Reader Exe Download

Thanks to B16MCC